Skip to main navigation Skip to search Skip to main content

In vitro and in vivo optimized reconstruction for low-keV virtual monoenergetic photon-counting detector CT angiography of lower legs

  • Dirk Graafen*
  • , Willi Bart
  • , Moritz C. Halfmann
  • , Lukas Müller
  • , Lukas Hobohm
  • , Yang Yang
  • , Achim Neufang
  • , Christine Espinola-Klein
  • , Michael B. Pitton
  • , Roman Kloeckner
  • , Akos Varga-Szemes
  • , Tilman Emrich
  • *Corresponding author for this work
  • Johannes Gutenberg University Mainz
  • Charite - Universitatsmedizin Berlin
  • Medical University of South Carolina

Abstract

Background: Lower extremity peripheral artery disease frequently presents with calcifications which reduces the accuracy of computed tomography (CT) angiography, especially below-the-knee. Photon-counting detector (PCD)-CT offers improved spatial resolution and less calcium blooming. We aimed to identify the optimal reconstruction parameters for PCD-CT angiography of the lower legs. Methods: Tubes with different diameters (1–5 mm) were filled with different iodine concentrations and scanned in a water container. Images were reconstructed with 0.4 mm isotropic resolution using a quantitative kernel at all available sharpness levels (Qr36 to Qr76) and using different levels of quantum iterative reconstruction (QIR-2–4). Noise and image sharpness were determined for all reconstructions. Additionally, CT angiograms of 20 patients, reconstructed with a medium (Qr44), sharp (Qr60), and ultrasharp (Qr72) kernel at QIR-2-4, were evaluated by three readers assessing noise, delineation of plaques and vessel walls, and overall quality. Results: In the phantom study, increased kernel sharpness led to higher image noise (e.g., 16, 38, 77 HU for Qr44, Qr60, Qr72, and QIR-3). Image sharpness increased with increasing kernel sharpness, reaching a plateau at the medium-high level 60. Higher QIR levels decreased image noise (e.g., 51, 38, 25 HU at QIR-2–4 and Qr60) without reducing vessel sharpness. The qualitative in vivo results confirmed these findings: the sharp kernel (Qr60) with the highest QIR yielded the best overall quality. Conclusion: The combination of a sharpness level optimized reconstruction kernel (Qr60) and the highest QIR level yield the best image quality for PCD-CT angiography of the lower legs when reconstructed at 0.4-mm resolution. Relevance statement: Using high-resolution PCD-CT angiography with optimized reconstruction parameters might improve diagnostic accuracy and confidence in peripheral artery disease of the lower legs. Key Points: Effective exploitation of the potential of PCD-CT angiography requires optimized reconstruction parameters. Too soft or too sharp reconstruction kernels reduce image quality. The highest level of quantum iterative reconstruction provides the best image quality. Graphical Abstract: (Figure presented.).

Original languageEnglish
Article number89
JournalEuropean Radiology Experimental
Volume8
Issue number1
Pages (from-to)89
DOIs
Publication statusPublished - 01.08.2024

Funding

Funders
Siemens CT

    UN SDGs

    This output contributes to the following UN Sustainable Development Goals (SDGs)

    1. SDG 3 - Good Health and Well-being
      SDG 3 Good Health and Well-being
    2. SDG 9 - Industry, Innovation, and Infrastructure
      SDG 9 Industry, Innovation, and Infrastructure

    Research Areas and Centers

    • Academic Focus: Biomedical Engineering

    DFG Research Classification Scheme

    • 2.22-30 Radiology

    Fingerprint

    Dive into the research topics of 'In vitro and in vivo optimized reconstruction for low-keV virtual monoenergetic photon-counting detector CT angiography of lower legs'. Together they form a unique fingerprint.

    Cite this