Image Based Analysis of Bone Graft Samples made by 3D Printing Using Conventional and Synchrotron-Radiation-Based Micro-Computed Tomography

S. H. Irsen; B. Leukers; C. Tille; F. Beckmann; B. Müller; T. M. Buzug; H. Seitz

doi:10.1007/978-3-540-68764-1_20

Image Based Analysis of Bone Graft Samples made by 3D Printing Using Conventional and Synchrotron-Radiation-Based Micro-Computed Tomography

S. H. Irsen, B. Leukers, C. Tille, F. Beckmann, B. Müller, T. M. Buzug, H. Seitz

Institut für Medizintechnik

Abstract

Rapid Prototyping and especially the 3D printing, allows generating complex porous ceramic scaffolds directly from powders. Furthermore, these technologies allow manufacturing patient-specific implants of centimeter size with an internal pore network to mimic bony structures including vascularization. The non-destructive analysis of the internal structure of such 3D printed scaffolds provides important information. We used computed-microtomography as investigation method. Conventional and Synchrotron radiation based methods were tested and compared.

Originalsprache	Englisch
Titel	Advances in Medical Engineering
Redakteure/-innen	Thorsten M. Buzug, Dietrich Holz, Jens Bongartz, Matthias Kohl-Bareis, Ulrich Hartmann, Simone Weber
Seitenumfang	6
Band	114
Erscheinungsort	Berlin, Heidelberg
Herausgeber (Verlag)	Springer Berlin Heidelberg
Erscheinungsdatum	01.01.2007
Seiten	121-126
ISBN (Print)	978-3-540-68763-4
ISBN (elektronisch)	978-3-540-68764-1
DOIs	https://doi.org/10.1007/978-3-540-68764-1_20
Publikationsstatus	Veröffentlicht - 01.01.2007

UN SDGs

Dieser Output leistet einen Beitrag zu folgendem(n) Ziel(en) für nachhaltige Entwicklung

SDG 3 – Gesundheit und Wohlergehen
SDG 9 – Industrie, Innovation und Infrastruktur

Dokumente

10.1007/978-3-540-68764-1_20

Weitere Links

researchgate.net

Zitieren

Irsen, S. H., Leukers, B., Tille, C., Beckmann, F., Müller, B., Buzug, T. M., & Seitz, H. (2007). Image Based Analysis of Bone Graft Samples made by 3D Printing Using Conventional and Synchrotron-Radiation-Based Micro-Computed Tomography. in T. M. Buzug, D. Holz, J. Bongartz, M. Kohl-Bareis, U. Hartmann, & S. Weber (Hrsg.), Advances in Medical Engineering (Band 114, S. 121-126). (Springer Proceedings in Physics; Band 114, Nr. 1). Springer Berlin Heidelberg. https://doi.org/10.1007/978-3-540-68764-1_20

Irsen, S. H. ; Leukers, B. ; Tille, C. et al. / Image Based Analysis of Bone Graft Samples made by 3D Printing Using Conventional and Synchrotron-Radiation-Based Micro-Computed Tomography. Advances in Medical Engineering. Hrsg. / Thorsten M. Buzug ; Dietrich Holz ; Jens Bongartz ; Matthias Kohl-Bareis ; Ulrich Hartmann ; Simone Weber. Band 114 Berlin, Heidelberg : Springer Berlin Heidelberg, 2007. S. 121-126 (Springer Proceedings in Physics; 1).

@inproceedings{234e9923e2c047feaff4cb317bd90173,

title = "Image Based Analysis of Bone Graft Samples made by 3D Printing Using Conventional and Synchrotron-Radiation-Based Micro-Computed Tomography",

abstract = "Rapid Prototyping and especially the 3D printing, allows generating complex porous ceramic scaffolds directly from powders. Furthermore, these technologies allow manufacturing patient-specific implants of centimeter size with an internal pore network to mimic bony structures including vascularization. The non-destructive analysis of the internal structure of such 3D printed scaffolds provides important information. We used computed-microtomography as investigation method. Conventional and Synchrotron radiation based methods were tested and compared.",

author = "Irsen, \{S. H.\} and B. Leukers and C. Tille and F. Beckmann and B. M{\"u}ller and Buzug, \{T. M.\} and H. Seitz",

year = "2007",

month = jan,

day = "1",

doi = "10.1007/978-3-540-68764-1\_20",

language = "English",

isbn = "978-3-540-68763-4",

volume = "114",

series = "Springer Proceedings in Physics",

publisher = "Springer Berlin Heidelberg",

number = "1",

pages = "121--126",

editor = "Buzug, \{Thorsten M.\} and Dietrich Holz and Jens Bongartz and Matthias Kohl-Bareis and Ulrich Hartmann and Simone Weber",

booktitle = "Advances in Medical Engineering",

}

Irsen, SH, Leukers, B, Tille, C, Beckmann, F, Müller, B, Buzug, TM & Seitz, H 2007, Image Based Analysis of Bone Graft Samples made by 3D Printing Using Conventional and Synchrotron-Radiation-Based Micro-Computed Tomography. in TM Buzug, D Holz, J Bongartz, M Kohl-Bareis, U Hartmann & S Weber (Hrsg.), Advances in Medical Engineering. Bd. 114, Springer Proceedings in Physics, Nr. 1, Bd. 114, Springer Berlin Heidelberg, Berlin, Heidelberg, S. 121-126. https://doi.org/10.1007/978-3-540-68764-1_20

Image Based Analysis of Bone Graft Samples made by 3D Printing Using Conventional and Synchrotron-Radiation-Based Micro-Computed Tomography. / Irsen, S. H.; Leukers, B.; Tille, C. et al.
Advances in Medical Engineering. Hrsg. / Thorsten M. Buzug; Dietrich Holz; Jens Bongartz; Matthias Kohl-Bareis; Ulrich Hartmann; Simone Weber. Band 114 Berlin, Heidelberg: Springer Berlin Heidelberg, 2007. S. 121-126 (Springer Proceedings in Physics; Band 114, Nr. 1).

Publikation: Kapitel in Büchern/Berichten/Konferenzbänden › Konferenzbeitrag › Begutachtung

TY - GEN

T1 - Image Based Analysis of Bone Graft Samples made by 3D Printing Using Conventional and Synchrotron-Radiation-Based Micro-Computed Tomography

AU - Irsen, S. H.

AU - Leukers, B.

AU - Tille, C.

AU - Beckmann, F.

AU - Müller, B.

AU - Buzug, T. M.

AU - Seitz, H.

PY - 2007/1/1

Y1 - 2007/1/1

N2 - Rapid Prototyping and especially the 3D printing, allows generating complex porous ceramic scaffolds directly from powders. Furthermore, these technologies allow manufacturing patient-specific implants of centimeter size with an internal pore network to mimic bony structures including vascularization. The non-destructive analysis of the internal structure of such 3D printed scaffolds provides important information. We used computed-microtomography as investigation method. Conventional and Synchrotron radiation based methods were tested and compared.

AB - Rapid Prototyping and especially the 3D printing, allows generating complex porous ceramic scaffolds directly from powders. Furthermore, these technologies allow manufacturing patient-specific implants of centimeter size with an internal pore network to mimic bony structures including vascularization. The non-destructive analysis of the internal structure of such 3D printed scaffolds provides important information. We used computed-microtomography as investigation method. Conventional and Synchrotron radiation based methods were tested and compared.

UR - https://www.researchgate.net/publication/224902242_Image_based_analysis_of_bone_graft_samples_made_by_3D_printing_using_conventional_and_synchrotronradiation-_based_micro-computed_tomography

U2 - 10.1007/978-3-540-68764-1_20

DO - 10.1007/978-3-540-68764-1_20

M3 - Conference contribution

SN - 978-3-540-68763-4

VL - 114

T3 - Springer Proceedings in Physics

SP - 121

EP - 126

BT - Advances in Medical Engineering

A2 - Buzug, Thorsten M.

A2 - Holz, Dietrich

A2 - Bongartz, Jens

A2 - Kohl-Bareis, Matthias

A2 - Hartmann, Ulrich

A2 - Weber, Simone

PB - Springer Berlin Heidelberg

CY - Berlin, Heidelberg

ER -

Irsen SH, Leukers B, Tille C, Beckmann F, Müller B, Buzug TM et al. Image Based Analysis of Bone Graft Samples made by 3D Printing Using Conventional and Synchrotron-Radiation-Based Micro-Computed Tomography. in Buzug TM, Holz D, Bongartz J, Kohl-Bareis M, Hartmann U, Weber S, Hrsg., Advances in Medical Engineering. Band 114. Berlin, Heidelberg: Springer Berlin Heidelberg. 2007. S. 121-126. (Springer Proceedings in Physics; 1). doi: 10.1007/978-3-540-68764-1_20

Image Based Analysis of Bone Graft Samples made by 3D Printing Using Conventional and Synchrotron-Radiation-Based Micro-Computed Tomography

Abstract

UN SDGs

Dokumente

Weitere Links

Fingerprint

Zitieren