TY - JOUR
T1 - Fourier domain mode-locked swept source at 1050 nm based on a tapered amplifier
AU - Marschall, Sebastian
AU - Klein, Thomas
AU - Wieser, Wolfgang
AU - Biedermann, Benjamin R.
AU - Hsu, Kevin
AU - Hansen, Kim P.
AU - Sumpf, Bernd
AU - Hasler, Karl Heinz
AU - Erbert, Götz
AU - Jensen, Ole B.
AU - Pedersen, Christian
AU - Huber, Robert
AU - Andersen, Peter E.
PY - 2010/7/19
Y1 - 2010/7/19
N2 - While swept source optical coherence tomography (OCT) in the 1050 nm range is promising for retinal imaging, there are certain challenges. Conventional semiconductor gain media have limited output power, and the performance of high-speed Fourier domain mode-locked (FDML) lasers suffers from chromatic dispersion in standard optical fiber. We developed a novel light source with a tapered amplifier as gain medium, and investigated the FDML performance comparing two fiber delay lines with different dispersion properties. We introduced an additional gain element into the resonator, and thereby achieved stable FDML operation, exploiting the full bandwidth of the tapered amplifier despite high dispersion. The light source operates at a repetition rate of 116 kHz with an effective average output power in excess of 30 mW. With a total sweep range of 70 nm, we achieved an axial resolution of 15 μn in air (∼11 μm in tissue) in OCT measurements. As our work shows, tapered amplifiers are suitable gain media for swept sources at 1050 nm with increased output power, while high gain counteracts dispersion effects in an FDML laser.
AB - While swept source optical coherence tomography (OCT) in the 1050 nm range is promising for retinal imaging, there are certain challenges. Conventional semiconductor gain media have limited output power, and the performance of high-speed Fourier domain mode-locked (FDML) lasers suffers from chromatic dispersion in standard optical fiber. We developed a novel light source with a tapered amplifier as gain medium, and investigated the FDML performance comparing two fiber delay lines with different dispersion properties. We introduced an additional gain element into the resonator, and thereby achieved stable FDML operation, exploiting the full bandwidth of the tapered amplifier despite high dispersion. The light source operates at a repetition rate of 116 kHz with an effective average output power in excess of 30 mW. With a total sweep range of 70 nm, we achieved an axial resolution of 15 μn in air (∼11 μm in tissue) in OCT measurements. As our work shows, tapered amplifiers are suitable gain media for swept sources at 1050 nm with increased output power, while high gain counteracts dispersion effects in an FDML laser.
UR - http://www.scopus.com/inward/record.url?scp=77954943931&partnerID=8YFLogxK
U2 - 10.1364/OE.18.015820
DO - 10.1364/OE.18.015820
M3 - Journal articles
C2 - 20720964
AN - SCOPUS:77954943931
SN - 1094-4087
VL - 18
SP - 15820
EP - 15831
JO - Optics Express
JF - Optics Express
IS - 15
ER -